Overview
I have an Icom IC-7300 Transceiver that I use for digital modes. I am going to record the Connectors setting here for my future reference but also for others who may want to check their settings or new users.
Connectors Settings
[MENU] > SET > Connectors
| Function Name | My Setting | Default Setting |
|---|---|---|
| ACC/USB Output Select | AF | AF |
| ACC/USB AF Output Level | 50% | 50% |
| ACC/USB AF SQL | OFF (Open) | OFF (Open) |
| ACC/USB AF Beep/Speech… Output | OFF | OFF |
| ACC/USB IF Output Level | 50% | 50% |
| ACC MOD Level | 50% | 50% |
| USB MOD Level | 50% | 50% |
| DATA OFF MOD | MIC,ACC | MIC,ACC |
| DATA MOD | USB | ACC |
| External Keypad VOICE | OFF | OFF |
| External Keypad KEYER | OFF | OFF |
| External Keypad RTTY | OFF | OFF |
| CI-V Baud Rate | Auto | Auto |
| CI-V Address | 94h | 94h |
| CI-V Transceive | OFF | ON |
| CI-V USB→REMOTE Transceive Address | 00h | 00h |
| CI-V Output (for ANT) | OFF | OFF |
| CI-V USB Port | Unlink from [REMOTE] | Unlink from [REMOTE] |
| CI-V USB Baud Rate | 115200 | Auto |
| CI-V USB Echo Back | ON | OFF |
| USB Serial Function | CI-V | CI-V |
| RTTY Decode Baud Rate | 9600 | 9600 |
| USB SEND | OFF | OFF |
| USB Keying (CW) | OFF | OFF |
| USB Keying (RTTY) | OFF | OFF |
| Inhibit Timer at USB Connection | ON | ON |
| PTT Port Function | PTT Input + SEND Output | PTT Input + SEND Output |
Serial Port Settings
Settings are typical for a serial connection.
- Speed/Baud Rate: 115200 (Match the CI-V USB Baud Rate setting from the radio)
- Data Bits: Eight (8)
- Stop Bits: One (1)
- Flow Control/Handshake: None
Leave a Reply