Bits, Bytes, & Radio Waves

A Journey Through Discovery

  • VxRail: Upgrade Notes

    Overview There are some things that should be done prior to upgrading the VxRail that will help with a smooth upgrade. I will not be performing a VxRail upgrade, here, but rather list resources that I have been provided or used in the past. Some of the resources below require you to log in to…

  • MyLab: Configuring VMware Horizon on Unified Access Gateway (UAG)

    Overview This post will document how to configure VMware Horizon on Unified Access Gateway (UAG). To get this working the first time, ensure the following appliances are configured. A Unified Access Gateway should already be deployed and configured. Reference the link for more information on how to:* Log into the Appliance Settings* Configure NTP servers*…

  • MyLab: Automated Instant-Clone Farm (VMware Horizon)

    Introduction This post will discuss the initial setup and configuration for an Automated Instant-Clone Farm for use with VMware Horizon. I am going to use this farm to publish applications and connect them into Workspace ONE Access (WS1 Access). Workspace ONE Access is not required for this technology, but can be leveraged. In this example,…

  • MyLab: Smart Card Authentication

    I use a YubiKey 5 Series security key (from Yubico) in my lab. This allows me to use strong authentication and test out security scenarios that I usually find myself in while on the job. I did use the reference material from Yubico to get this working, but am going to transcribe and document this…

  • MyLab: Workspace ONE Access (post v2)

    Preparing to Deploy the VMware Workspace ONE Access Appliance Preparation tasks include the following:

  • MyLab: VMware Horizon True SSO

    An Enterprise Certificate Authority needs to be accessible. Certificates are a big part of True SSO. There are going to be short term certificates that will be issued. True SSO will require the following servers and services: Familiarity with the command line is helpful, but not necessary as well.

This is how it all started…

I started this site with the intent to aggregate as much information as possible in one place. I use this to record lessons learned or frustrating configurations I have experienced on the job or just tinkering (learning) and just couldn’t find a better resource available. I have tried to be as thorough and accurate as possible, but technology is rapidly evolving and every environment is different. I may miss things along the way and my setup most likely differs compared to yours.

I hope you find this site has some value to you.

Welcome to Bits, Bytes, and Radio Waves! 

If you have any questions or comments (or just want to give me a shout-out), please feel free to contact me!

Aaron Rombaut

Writer & Technologist